Whelen PEIMDC12 Manuel d'utilisateur télécharger pdf

Page 1

POS 1 -

POS 2 - Input / WHT/RED (HORN MUTE)*

POS 3 - Input / BRN (FRONT WIG WAGS)

POS 4 - Input / RED (6”) (REAR WIG WAGS)*

POS 13 - BLK (10”) (GROUND)

RED (10”) (+12VDC) Fuse @ 5A

POS 5 - Output / BLK/WHT (HORN SWITCH ACTIVATED)*

POS 6 - Output / WHT/GRY (PARK)*

POS 7 - Output / WHT/BLK (BRAKE)*

POS 8 - Output / BLU/BLK (ENGINE RUNNING)*

POS 9 - Output / WHT/GRN (DRIVER SIDE AJAR)*

POS 10 - Output / WHT/YEL (HEADLIGHT)*

POS 24 - Output / WHT/VIO (VEHICLE SPEED)****

REAR VIEW

(to aftermarket

police equipment)

POS 12 - WHT/VIO (VEHICLE SPEED)

POS 14 -

POS 15 - BRN (FRONT WIG-WAGS)

POS 16 - RED (REAR WIG WAGS)

POS 17 - BLK/WHT (HORN SWITCH ACTIVATED)

POS 18 - WHT/GRY (PARK)

POS 19 - WHT/BLK (BRAKE)

POS 20 - BLU/BLK (ENGINE RUNNING)

POS 21 - WHT/GRN (DRIVER DOOR AJAR)

POS 22 - WHT/YEL (HEADLIGHT)

WHT/RED (HORN MUTE)

REAR VIEW

(to Dodge Charger

Interface Module)

PIN 1 - BRN (FRONT WIG-WAGS)

PIN 2 - RED (REAR WIG-WAGS)

PIN 4 - WHT/BLK (BRAKE)

PIN 5 - BLK/WHT (HORN SWITCH ACTIVATED)

PIN 6 - WHT/GRY (PARK)

PIN 8 - WHT/YEL (HEADLIGHT)

PIN 14 - BLU/BLK (ENGINE RUNNING)

PIN 15 - WHT/GRN (DRIVER DOOR AJAR)

PIN 19 - WHT/VIO (VEHICLE SPEED)

PIN 20 - WHT/RED (HORN MUTE)

REAR VIEW

(to Police Equipment

Interface Connector)

*Inputs require a 0.25ma signal MIN (12VDC)

**Outputs are rated for 13ma@12VDC MAX

***+12V in Drive, Ground in Park

****Analog output:1V per 10 m.p.h.

Sample Connections

5A Fuse

(Customer Supplied)

1A Fuse

SP/ST Switch

RED (To +12VDC)

BRN (front wig-wags) - Input +12VDC

BLACK (To Ground)

WARNING! All customer supplied wires that connect to

the positive terminal of the battery must be sized to

supply at least 125% of the maximum operating

current and FUSED at the battery to carry that load. DO

NOT USE CIRCUIT BREAKERS WITH THIS PRODUCT!

In the above configuration, the front wig-wags

are activated with the SP/ST switch shown.

Also, when the vehicle headlights are turned on,

the headlight output wire (WHT/YEL) will provide

+12VDC to the backlight wire of the sample

control head.

Remember:

Inputs +12VDC

Outputs +12VDC

REQUIRE

PROVIDE

Butt Splice

WHT/YEL (headlight) - Output

YEL (backlight)

123

STAND

RAD PA T3MAN HF WAIL YELP

VOL.

DOWN

(LOW

POWER)

MANUAL

(MOM.)

AIR

HORN

(MOM.)

SW4

SW5

SW6 SW7

SW8

(T/A)

1516

181920

1112

678910

1516

181920

2122

1112

16 11

17 12

10 7

18 13

2122

568

1415

ENGINEERING COMPANY INC.

51 Winthrop Road

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Internet: www.whelen.com

Sales e-mail: [email protected]

Miscellaneous

Installation Guide:

Police Equipment Upfitter

Interface Module

(2012 Dodge Charger)

Form No.14658A (073013)

This module provides conditioned signals to and from the

Police Equipment Interface Module (PEIM) found on all

Dodge Charger police vehicles. The 24-position PEIM

connector is located under the Instrument Panel Center

Console. To access this connector, it is necessary to

remove the plastic cover located just ahead of the police

equipment mounting bracket on the center console. For

further information, refer to the Police Package Owner’s

Manual supplied with the vehicle.

WARNING! Do not alter the vehicle harness circuits

in any manner (including splicing or cutting).

For warranty information regarding this product, visit www.whelen.com/warranty

Miscellaneous 1

Résumé du contenu

Page 1 - Miscellaneous

Page 1POS 1 -POS 2 - Input / WHT/RED (HORN MUTE)*POS 3 - Input / BRN (FRONT WIG WAGS)POS 4 - Input / RED (6”) (REAR WIG WAGS)*POS 13 - BLK (10”) (GROU

Commentaires sur ces manuels

Pas de commentaire

Whelen PEIMDC12 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Whelen PEIMDC12. Whelen PEIMDC12 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Whelen PEIMDC12